DBSC Represents at States

A large contingent of DBSC members travelled north to Belmont to participate in the NSW/ACT  State Championships last weekend.  The fleet was met with a mixed bag in terms of conditions and results!

Extremely light and unpredictable easterly winds on Saturday, which included 360-degree shifts during the first race, resulting in nearly every leg being upwind, including finishing on an upwind "reach" in about 1 knot; and a 90-degree shift mid second race.  Brooke Wilson had an outstanding day, to finish in 1st place in the Radials.

Sunday's breeze bucked the forecast for a blustering 20+kts north westerly, when the members of the Australian Sailing Team in both fleets came to the fore and showed us all how it is done.

DBSC had one quarter of the fleet, with 29 boats – with some great results.  In the Radials, Daniel Costandi 4th, Brooke Wilson 5th, Zac West 8th, Sylvie Stannage 9th, James Tudball 10th.  In the Standards, Finn Alexander 4th, Mark Louis 7th, Rod Barnes 10th.

Thanks to Rod Barnes for his efforts in coordinating transport and accommodation for a great weekend away.  And thanks to Vic Whitby, Craig Sheers and Richard Finlayson, who provided much-welcomed on-water support to team-DBSC throughout the regatta.  Thanks also to Gavin Blake, who saluted the fleet by "buzzing the tower" at the Squid's Ink motel in his work helicopter as we derigged on Sunday.

Some of the DBSC crew gathers for a post-race drink. Photo by Jules Hall.

Sweet Sprints

While the big guns were up north at the States, other members took the chance to hone their skills in a series of short sprint races. The light NE breeze and relatively small fleet made for some enjoyable sailing. Congratulations to Tim Heath who lead the pack in many races.  

Thanks to the race management team of Mark Crowhurst (PRO), assisted by Steven London (COTD), Christine Patton (CSO/CO-COTD) and Kirk Marcolina and David Devlin who helped Paul and Shirley with the canteen.

Tim Heath won several of the day’s races. Photo by Christine Patton.

Up Next…

Wednesday 9 December, 5pm splash – Twilight Sailing

Saturday 12 December, 2pm start – Tyrell and Rousso races (See info above)

Saturday 12 December, 5:30pm – Christmas Party (See info above)

Wednesday 16 December, 5pm splash – Twilight Sailing

Saturday 19 December, 9am – Learn to Race

Saturday 19 December, 2pm start – Final Heats of the Spring Point Score

Last Chance to RSVP for DBSC Xmas Party

With numbers capped at 60 due to COVID restrictions, we are almost up to capacity for our Christmas party on 12 December. If don't want to miss this special evening, you need to RSVP HERE now. 

Here is the invitation:

States Cause Changes this Saturday

Good luck to the DBSC members who are traveling to Belmont this weekend for the NSW & ACT Laser State Championships. Because there are so many members competing in the States, there will be no Learn to Race on Saturday. But have no fear, there will still be Sprint Racing on Saturday afternoon for those not traveling. 

MP Dave Sharma Officially Launches New RIB

Our local Federal Member, Dave Sharma, came to the clubhouse last Saturday to officially launch the new Paul Adam RIB. The federal government provided a grant which helped DBSC purchase the new rescue boat. On behalf of the federal government, Mr Sharma spoke to the importance of supporting volunteer organisations like ours as they are vital to the community.

Along with Mr Sharma’s remarks, Paul Adam spoke about how far DBSC has evolved over the 40 years he has been part of the club. He observed that when he first joined the wooden rescue boat required the driver to sit on the floor and steer with a tiller.  

Paul laid a bouquet of leaves and flowers on the RIB in a tradition that is meant to create safe passage for boat:

Photo by Peter Collie.

Mr Sharma christened the boat with a traditional Champagne spray:

Photo by Peter Collie.

From his post on Instagram it looks like Mr Sharma enjoyed captaining Commodore Cox around the harbor:

We Are Competent

Thanks to all the members who attended our yearly competency training session last Saturday, which covered COTD Responsibilities, Course Setting & Race Management, Emergency & Rescue Management, and RIB/Radio Operation. We are grateful to our four volunteer trainers: Andrew Cox, Pat Levy, David Murphy and Michael Osborne who imparted their skills and knowledge to an appreciative audience. 

Thanks to Diana Chen for filming videos of the presentations which are available to watch online at dbsc.com.au/training-videos and documents available at www.dbsc.com.au/safety and www.dbsc.com.au/procotd. We are also in the process of producing short clips of all the COTD duties including RIB Operation in much more detail for future reference.

Race Report

A gusty, shifty and very hot NW wind greeted the fleet for an afternoon of racing that served both as Club Championships heats 7 & 8  and Spring Point Score heats 13 & 14.  

The results were: Championship – Full Rigs: David Newman (Championship Heat 7) and Rod Barnes (Championship Heat 8); Radials: Daniel Costandi (Championship Heat 7) and Sylvie Stannage (Championship Heat 8); Point Score (after handicap): Standards: Ashley Deacon (Point Score Heat 13) and Hadrien Bourely (Point Score Heat 14); Radial / 4.7s: Kate McHugh (Point Score Heat 13) and Jim Dounis (Point Score Heat 14).  

Thanks to the race volunteers who helped in difficult shifty conditions — Ian Alexander    (PRO), assisted on the Jazzman by Julian Van Aalst (LTRaR) and Clare Alexander, John Verco (COTD), Christine Patton (CSO/CO-COTD) and Clare Alexander and Mike Dunne who helped Paul and Shirley with the canteen. 

Bulk Sail Order Update

Thanks to all who have ordered sails through our bulk sail program. We appreciate your patience as delivery has taken longer than anticipated. The good news is that a few of the standard sails will be delivered later this week, with the remainder of the sails delivered to DBSC or dispatched via the post by Monday 14 December. 

Help Needed with New Venturis for Bergman

We’re looking for someone to help make new venturis out of vinyl type material on a sewing machine for the Bergman. If you’re keen please contact Gerry Baltel HERE.